Cutting Porcelain Tile With Manual Cutter
Porcelain tiles are known for their elegant look and durability, making them a popular choice for home and commercial use. However, cutting them can be quite challenging, especially if you are not using the right tools. A manual cutter is one of the best tools you can use to cut porcelain tiles because it is easy to use and gives you a precise cut. This guide will show you how to cut porcelain tiles with a manual cutter.
Choosing the Right Manual Cutter
The first step in cutting porcelain tiles with a manual cutter is to choose the right cutter. There are different types of manual cutters available, and each one is designed for a specific type of tile. Therefore, you need to choose a cutter that is specifically designed for cutting porcelain tiles. Some popular brands that you might want to consider include Rubi, Sigma, and Montolit.
Preparing the Porcelain Tile
Before you start cutting the porcelain tile, you need to prepare it first. Use a pencil to mark the area that you want to cut. Ensure that the mark is precise so that you get an accurate cut. Then, place the tile on the manual cutter, making sure that it is aligned correctly. Use the measurements on the cutter to ensure that the tile is at the correct angle.
Making the Cut
To make the cut, use the handle of the manual cutter to apply pressure on the tile. Start at one end and move towards the other end of the tile. Ensure that the blade is properly aligned with the mark that you made on the tile. Then, apply maximum pressure to the handle to make the cut. The cutter will snap the tile along the scored line, giving you a clean and precise cut.
Cutting Curves and Irregular Shapes
If you need to cut curves or irregular shapes, then a manual cutter might not be the best tool to use. However, you can still use it by making a series of straight cuts along the curve. Then, use a nipper to remove the edges until you get the desired shape.
Finishing the Cut
After making the cut, use a rubbing stone to smooth any rough edges. You can also use a sanding block to remove any burrs that are left behind. This will give your tile a clean and smooth edge.
Cleaning Up
Once you are done cutting the porcelain tile, it is essential to clean up the work area. Remove any debris or dust left behind, and store your manual cutter in a safe place. This will ensure that it lasts longer and remains in good condition.
Conclusion
Cutting porcelain tiles with a manual cutter can be easy if you follow the steps above. Remember to choose the right cutter, prepare the tile correctly, and make the cut smoothly. With a little practice, you will be able to cut porcelain tiles like a pro.
