Diamond Blade Tile Cutter Introduction
Diamond Blade Tile Cutter is a cutting construction equipment suitable for basement, chimney and pillar cutting demolition and repair work. Wire saws (electric rope saws) are suitable for close packed reinforced concrete structures, thick brick walls, and even underwater cutting operations. Wire saw (electric rope saw) can meet the cutting depth of hydraulic wall saw. The depth of the cutting operation is not limited, and the operating environment is more adaptable and efficient. Electric rope sawing machine is the backup equipment of hydraulic wall sawing machine. The appearance of hydraulic diamond wire saw (hydraulic diamond rope saw) ensures the protection of building demolition and reconstruction construction, and retains the safety of building parts. It is applied in the construction projects of demolition companies and demolition companies.
Diamond Blade Tile Cutter is a building base for thick mixing. Cutting and removing equipment for concrete and irregular concrete. For example, the cutting of reinforced concrete beams, columns, Bridges, floors and stone processing and other building foundation concrete structures need to be partially dismantled then only the use of rope saw cutting. Transverse cutting, flexible use method. Vertical cutting can be. The power of electric rope saw machine is to drive the driving wheel directly by the motor. *** low. The disadvantage is not as flexible as the hydraulic rope saw is construction. The driving wheel spins the rope. The advantage is that there is no need for large amounts of cooling water.
Application Area of Diamond Blade Tile Cutter
The Diamond Blade Tile Cutter is designed for materials researchers to cut brittle material samples. For example, crystal, ceramics, glass, honeycomb ceramics (automobile exhaust treatment carrier, thin wall, fragile), metal, plastic, PCB, rock samples, mineral samples, refractory materials, building materials, dental materials, biological and bionic composite materials, etc. When it is used for ultra-thin cutting, the thickness of the thin slice can reach 0.08mm. Compared with STX-202, the Y-axis feed mode is improved from manual micrometer control to stepper motor control, which makes the cutting control more convenient and fast.
What kind of material is the diamond blade tile cutting machine used for
Automatic Diamond Blade Tile Cutter can not only be used for ceramics, glass, honeycomb ceramics (automobile exhaust treatment carrier, thin wall, fragile), rock samples, PCB board, meteorites, Marine tuberculosis, refractory materials, biological and bionic composite materials and other conventional cutting, It can also be used for seed crystal cutting of silicon, white gem, sapphire and other artificial crystals, as well as the square cutting of silicon crystal and sapphire crystal. When used in the slicing of precious stones and bioplasticized specimens, it not only has fine slit, but also has good quality of cutting pieces, which greatly improves the utilization rate of materials.
Diamond Blade Tile Cutter is an ideal tool for cutting fragile, brittle, small size materials. Diamond-embedded wire saw wire is especially suitable for non-destructive cutting of various crystals and substrates, such as magnesium oxide crystals and shale slicing.
Diamond Blade Tile Cutter is a CE certified cutting equipment. Used for material analysis sample cutting, such as crystal, ceramics, glass, honeycomb ceramics (automobile exhaust treatment carrier, thin wall, fragile), rock samples, ore samples, metal, plastic, PCB, refractory materials, building materials, biological and bionic composite materials. This machine is especially suitable for ultra-thin cutting, the thickness of the thin slice can reach 0.2mm.
